Everlast PowerMTS 141Si 140 Amp 110-Volt AC Voltage Input DC MIG/TIG/Stick Multi-Process Welder Compact and Lightweight

Everlast PowerMTS 141Si 140 Amp 110-Volt AC Voltage Input DC MIG/TIG/Stick Multi-Process Welder Compact and Lightweight

PowerMTS 141Si is the ultimate solution for customers who are searching for 120-Volt portable all-in-1 DC welder package. The unit features 140A MIG, 140A DC TIG and 80A DC Stick welding capability. The MIG feature of PowerMTS 141Si can even weld Aluminum with an optional spool gun or weld with Flux-Cored wire when equipped with Flux-Cored drive rolls. It supports 4 in. and 8 in. rolls and .023 in. and .030 in. wire. In TIG mode, the unit can weld Steel, Stainless and even Titanium. PowerMTS 141Si features HF and LIft Start TIG modes and also works with optional TIG foot pedal (NOT included) to start the arc and vary the Amperage just like a proper DC TIG welder should do. It has built-in automatic gas control and a separate gas inlet for TIG so that the connections don’t have to be shared with MIG. As far as 140A rating goes, it should be more than enough power to weld steel or stainless in multiple passes up to 1/4 in. thick and more than enough for 1/8 in. in a single pass. And Stick function performance of the welder supports welding with popular 3/32 in. welding rods such as E7014, E7018 and most E6011 (however this unit is NOT designed for E6010 use).The simple intuitive control panel makes PowerMTS 141Si easy to learn and weld with. Even the bright blue LED display is designed to be more readable in bright light conditions. Overall, PowerMTS 141Si offers great portability, usability and performance. And, of course, don’t forget about 5 year parts and labor warranty.

• Comes with 15 series MIG gun and 17-series air-cooled TIG torch
• All digital DC CC/CV multi-process inverter design with a compact frame is designed for true portability in mind
• Light weight design makes the unit extremely portable, ideal for jobsites and motorsports
• 4 in. and 8 in. Dia wire spool capacity provides a good compromise for long duration welding and portability
• Simple-to-use MIG, DC TIG and DC stick operation
• 2T and 4T operation for MIG and TIG operation
• Foot pedal capable (Foot pedal optional)
• Flux-cored capable with optional drive rolls
• Spool gun capable for MIG
• High frequency start and lift start modes for TIG
• 2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG
• Auto pre and post flow control for MIG and TIG
• Separate gas connections in rear for MIG and TIG
• Built-in solenoid for automatic gas control in TIG mode
• Note: this welder is not designed to handle 6010 rod, but it can handle 6011 just fine

 

Dimensions

Product Depth (in.)	17 in	Product Height (in.)	12 in
Product Width (in.)	9 in

Details

Duty Cycle (%)	25	Engine Power	Electric (AC)
Included	Additional Tips, Hose, Kit, Tips, Torch	Input Power (Volts)	120
Material Application Thickness (in.)	0.25	Maximum amperage output (amps)	140
Minimum amperage output (amps)	10	Output Current Mode	DC
Rated Output (Volts)	23
Welder Type	Arc, MIG, Multi-Process, Stick, TIG, Wire-Feed

Warranty / Certifications

Manufacturer Warranty	5 year warranty