Forney 52750 6-Volts at 2 Amp, 10 Amp and 20 Amp and 12-Volts at 2 Amp, 10 Amp, 20 Amp and 100 Amp Start Battery Charger

Forney 52750 6-Volts at 2 Amp, 10 Amp and 20 Amp and 12-Volts at 2 Amp, 10 Amp, 20 Amp and 100 Amp Start Battery Charger

This Forney battery/trickle charger is also commonly referred to as a bench charger. Features LED indicators and button controls for easy reading and accuracy. It can charge both a 6-Volt and/or a 12-Volt battery at 2 Amp (trickle), 10 Amp (standard) and 20 Amp (quick charge). At 12-Volt, this bench charger also has a 100 Amp Engine Start charging capability. Using the 100 Amp emergency start setting is powerful enough to bring cars, SUVs and small trucks back to life. It is ETL certified. The recessed control panel protects against accidental setting changes. Features LED indicators and button controls for easy reading and accuracy. This charger is spark proof. It is suitable for Absorbed Glass Mat (AGM), GEL and standard (STD) batteries. It has an automatic charge cycle functionality switches to float mode after fully charging the battery . Short circuit, overheat and reverse polarity protection will not operate if clamps are reversed. The charger will enter repair mode if a rapid drop in voltage is detected. An error notification will light up if a bad connection is detected. A 13.6-Volt power supply mode provides DC power supply for powering any 12-Volt device (e.g., a tire inflator) or as a memory retainer when replacing a battery. The active charging indicator cycles between volts, amps and battery percent. The auto amperage detection feature detects best amperage based on battery condition. Wrap cleats provide convenient cord storage.

• · Compatible with traditional lead acid, AGM, and GEL batteries
• · Easy to use controls and LED indicators for convenient use
• · Recessed controls and safety features add unit durability
• LED indicators and button controls for easy reading and accuracy
• California residentssee Prop 65 WARNINGS

 

Dimensions

Product Depth (in.)	10.88 in	Product Height (in.)	6.88 in
Product Width (in.)	11 in

Details

Amperage (amps)	100 A	Automatic/Manual	Automatic
Automotive Part Type	Battery Charger	Charger type	AC or DC
Cord Length (ft.)	6 ft	Features	Engine Start Function
Handheld/wheels	Hand	Product Weight (lb.)	14.28 lb
		Voltage Output (volts)	12 V

Warranty / Certifications

Certifications and Listings	ETL Listed	Manufacturer Warranty	30 days on product defects including material and workmanship that may occur under normal use and care, 90 days on parts and labor on parts outside the charger excluding knobs, 3 years on all internal electrical components that can not be accessed without removing the cover and 5 years on transformers and rectifiers