No products in the cart.
New collection
Get ready for summer
Milwaukee M18 FUEL 18V Lithium-Ion 16-Gauge Straight Finish Nailer, M18 Fan and HIGH OUTPUT XC8.0Ah Battery/Charger Starter Kit
$408.51
- Delivers clean/consistent nail holes & tool-free depth adjustment
- Powerful 18V motor blows air up to 17 MPH delivers up to 284 CFM
- 50% more power to replace 15 Amp corded tools and runs 50% cooler
Milwaukee 3020-20-48-59-1880-0886-20 M18 FUEL 18V Lithium-Ion 16-Gauge Straight Finish Nailer, M18 Fan and HIGH OUTPUT XC8.0Ah Battery/Charger Starter Kit
The Milwaukee M18 FUEL 16 Gauge Straight Finish Nailer provides peak productivity at your jobsite, delivering unmatched nailing performance without the hassle of a compressor and hose. Leveraging the nitrogen air spring mechanism, the 16 Gauge Straight Finish Nailer allows you to consistently sink nails to your required depth in hard and soft woods while leaving clean nail holes, making for repeatable results and easy filling. The nitrogen air spring mechanism, combined with the POWERSTATE Brushless Motor and REDLINK PLUS Intelligence, delivers a pneumatic-like nailing response with zero ramp-up time from nail to nail, keeping you productive and efficient throughout your job. This cordless finish nailer features a compact and ergonomic design providing access to tight spaces where nailing is required while limiting fatigue when using the tool. When paired with an M18 REDLITHIUM CP2.0 battery pack, this battery-powered nailer fires up to 700 nails per charge and is fully compatible with all M18 REDLITHIUM batteries. The M18 Jobsite Fan provides the most powerful airflow and unmatched run-time in a compact size. The 0886-20 can circulate air over 40 ft. making it ideal for drying or cooling on a variety of jobsites. Powered by the M18 REDLITHIUM battery the Jobsite Fan delivers up to 17-hours of run-time on low for all day run-time on a single battery charge.
- Tool free depth adjustment and jam clearing latch
- Sequential and contact actuation firing modes
- Tip Storage On Magazine
- LED work light
- No gas cartridge
- Power to nail hardwoods and softwoods
- Compatible with all 1 – 2 ½” 16GA Straight Finish Nails
- Fires 3 Nails Per Second
- Fires 700 Nails Per Charge on M18 CP2.0 Battery
- 110 Nail Magazine Capacity
- M18 Fan has a Powerful Airflow system that circulates air over 40 ft
- M18 Fan has Hanging holes that allow fan to be hung from various jobsite materials
- M18 Fan has 3-speed settings: high, medium, low
- M18 REDLITHIUM HIGH OUTPUT XC8.0 battery: provides 50% more power and runs 50% cooler versus M18 REDLITHIUMXC battery packs
- Compatible with all M18 REDLITHIUM batteries
- Includes: (1) M18 FUEL 16 Gauge Straight Finish Nailer (3020-20), (1) M18 jobsite fan (0886-20), (1) AC adaptor, (1) M18 REDLITHIUM HIGH OUTPUT XC8.0 battery pack (48-11-1880), and (1) M12 and M18 rapid charger (48-59-1808)
Dimensions
| Battery Charge Time (Hours) | 0 | Nail Angle | 0 degree |
|---|---|---|---|
| Nail Gauge | 16 gauge | Product Depth (in.) | 12.9 in |
| Product Height (in.) | 11.7 in | Product Width (in.) | 5 in |
Details
| Air Tool Type | Air Nailer | Battery Amp Hours | No Battery |
|---|---|---|---|
| Battery Voltage (V) | 18V | Battery/Charger | Tool Only |
| Charger Included | Charger Not Included | Condition | New |
| Cord Style | Cordless | Cordless/Corded | Cordless |
| Firing Mode | Contact, Single Sequential | Included | No additional components or accessories are included |
| Loading type | Strip | Magazine Capacity | 110 |
| Maximum Fastener Size | 2-1/2 in | Minimum Fastener Size | 1 in |
| Motor Type | Brushless | Multi-Purpose | Single Purpose |
| Nail Gun Angle | Straight | Nailer Features | Lithium Ion Battery |
| Number of Total Batteries Included | 0 | Power Type | Air |
| Tools Product Type | Air Tool | Tool Weight (lb.) | 6 lb |
| Brand |
|---|
Reviews
There are no reviews yet.