Trion 259112-102 Air Bear 20x25x5 Inch MERV 11 Air Purifier Filter (3 Pack)

Trion 259112-102 Air Bear 20x25x5 Inch MERV 11 Air Purifier Filter (3 Pack)

 

Keep your air cleaner running its best by replacing the filter media every few months. When it’s time to replace the filter in your Trion Air Bear air purification system, look to the Trion High Performance Replacement Air Filter to keep your air clean and breathable. This air purifier filter replacement is Trion part number 259112-102. You can use this air filter media in Air Bear Supreme, Right Angle, and Cub filters with accommodating sizes. This replacement air filter measures 20 inches high, 25 inches wide, and 5 inches deep (size does not include 0.25-inch gasket located along the top and bottom edges of the filter). Trap dirt, dust, pollen, pet dander, and other airborne particles as small as 1 micron in this air filter. This high-efficiency air filter is MERV 11 rated with electrostatically-charged synthetic filter material. The non-woven, 5-inch thick, pleated filter media retains its shape even when dirty or when air pressure drops, guaranteeing that the filter captures as much dirt and dust as possible. The factory-installed double gasket eliminates the need for filter bypass. Enjoy cleaner air in your home by replacing an old or dirty air filter with the Trion Replacement Air Filter.

 

PRODUCT FEATURES

• (3) Replacement air filter media for your Trion Air Bear air cleaners; Filters out and captures dust, pollen, pet dander, and other airborne particles as small as 1 micron
• Measures 20 inches high, 25 inches wide, and 5 inches deep (size does not include 0.25-inch gasket located along the top and bottom edges of the filter)
• MERV 11 rated high-performance filter features electrostatically-charged synthetic material and provides superior efficiency with minimal added pressure drop
• Factory-installed double gasket eliminates the need for filter bypass
• Non-woven, 5-inch thick, pleated filter media retains its shape even when dirty or when air pressure drops, guaranteeing that the filter captures as much dirt and dust as possible
• Finger-supported vertical pleats remain evenly spaced while maximizing dirt-holding capacity low pressures
• Galvanized, rust-resistant wire mesh, integral width filter media supports media and retains pleat shape even when dirty
• Moisture-resistant frame retains strength and shape even in high humidity
• Replace your filter every 6 months for best performance
• Part/Model number: 259112-102
• Color: White
• Nominal dimensions (D x W x H): 5 x 25 x 20 inches
• Actual dimensions (D x W x H): 4.94 x 24.25 x 19.75 inches
• Mesh
• Wipe Clean
• Imported

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm

Recommends

• Click here for more products on Our Website
• See review off product on Youtube